|
|
The Craftsmen (2)
In (1) 550
Carrier wheelchair and scooter carrier features a
2 section ramp that folds up and out into 3 different
positions. The first position keeps the ramp
folded flat to the carrier surface and held down with a
spring pull pin. The folded flat position is to keep the ramp self
stored and secured when the carrier is folded up. The second ramp
position allows the ramp to stand upright when a scooter or wheelchair
is on the carrier. The ramp is held vertically in place with a spring
pull pin. The last position is the ramp unfolded. This position allows
for scooters or power wheelchairs to be pushed or driven up the ramp.
Please Note: Your Scooter or Wheelchair must be unoccupied
when loading the Craftsmen (2)
In (1) 550
Carrier. |
| The Craftsmen (2)
In (1) 550
Carrier folds easily with a simple pull of a hitch pin and
unlike most can be parked with the simple pull of hand plunger. This feature allow you
to save space when parking in car ports, garages, or parking
lots! The Craftsmen (2)
In (1) 550
Carrier has a heavy duty weight capacity of 550 Pounds and is
constructed of a high grade steel with a superior powder coat
finish to protect it from the elements. |
|
| |
|
|
|
The photo
to the left show the simple action of the
pull handle positioned in a easy location allowing the
Craftsmen (2)
In (1) 550
Carrier to simply fold
upright flush against the vehicle as shown in the photo above.
|
| |
|
|
The Photo To
The Right Shows The Gear And Plunger. This Is The Key That Makes
The
Craftsmen (2)
In (1)
550 Carrier
So
Simple To Use. The
Gear & Plunger Provides An Easy Smooth Lift When Folding It
Flat Against The Vehicle. This Plunger Also Removes Any Space,
Gaps And Play That Most All Other Carriers And Trailers Would Normally
Experience. |
 |
| |
|
|
|
The
Craftsmen (2)
In (1) 550
Carrier
is equipped with spring loaded quick locking pin lock's for locking
the loading ramp into its three different positions. The surface of the
Craftsmen (2)
In (1) 550
Carrier is a heavy duty steel mesh with 1" square support tubes
underneath that will not bend or flex from the weight of your
scooter or wheelchair. The Craftsmen (2)
In (1) 550
Carrier is built with the highest quality material resulting in
the highest quality carrier for hauling your expensive mobility
scooter / wheelchair. |
| |
|
|
The
Craftsmen (2)
In (1) 550
Carrier
is made from a strong lightweight alloy and has a durable exterior
finish that resists scratches and corrosion. This structure also
offers a amazing 550 pound weight capacity, that is more than five
times the weight of the
Craftsmen (2)
In (1) 550
Carrier. |
 |
| |
|
| |
|
|
|
|
(Set Of Four) Quick Set Ratchet Tie Downs
Free.
The Craftsmen (2)
In (1)
550 comes standard with A (Set Of Four) Quick Set Ratchet Tie
Downs that have a capacity of 2,000 Pounds. The Quick Ratchet
Feature allows you to secure your scooter/wheelchair in just
seconds. There is also a instant quick release lever that
removes all tension instantly when you are ready to use or
remove your scooter/wheelchair off the Craftsmen (2)
In (1)
550. |
| |
|
| All Weather Heavy Duty
Durable Nylon Cover. The
Craftsmen (2)
In (1)
550 also comes with a All
Weather Heavy Duty Nylon Cover that is available in small,
medium & large. This cover protects your Scooter / Wheelchair
from Rain, Snow, Road Objects and even the Hot Sun. The large
would be for large 3 & 4 wheel scooters. Rarely would you select
the Large for a wheelchair although if you should have an
abnormally large wheelchair then the large size would be
appropriate. The medium is the most common use for most all
power wheelchairs and mid size scooters. The small is strictly
for lightweight small portable scooters. |
 |
