Frequently Asked Questions About the Model EP-325

1. How does the Model EP-325 differ from other models?
    
   The Model EP-325 is a large, heavy-duty patient lift. Its base and frame weigh over 50 pounds more than the Model EP-110 or Model EP-255. The Model EP-325 incorporates a similar column adjustment as the Model EP-255. The Model EP-325 also has two other crank adjustments – one raises and lowers the foot base and the other widens and narrows the wheelbase.
    
   The Model EP-325 uses an offset column (to the right of the transferee's legs). This patient lift has a single knee pad for both legs – usually preferred by individual's whose legs spasm together.
    
2. My need is for a patient lift that will work with many patients. Is the Model EP-325 suitable?
    
   Yes – especially if the population of clients is adult size. The Model EP-325 adjusts quickly. It does not require moving a bolt to change column height – instead, you simply turn a crank.
    
3. Can we turn the crank to raise and lower a patient while they are on the patient lift?
    
   This is not recommended – although it is sometimes done. The gear reduction crank is designed for light loads. If one does adjust the patient lift up or down with a client "on board," it should be done with caution – because the client's position on the patient lift is changing. If done, height adjustment with a client on the patient lift should only be done with a chair or bed behind the patient.
    
4. Does the optional adjustable elevating foot base attach to the patient lift?
    
   The Model EP-325 does not need an elevating foot base for shorter persons, because it incorporates one in its design. Simply turn the crank and the foot base raises or lowers.
    
5. Tone causes my clients foot to occasionally moved from the foot base. How can this be prevented?
    
   See our accessories for heel loops, toe loops and other special items. Special foot plates can be provided at your request.
    
6. Can the two-piece (split chest pad) be added to the Model EP-325?
    
   A two-piece split chest pad may be added to the Model EP-325. It uses the same bolt pattern so this can be done in the field. The two-piece chest pad is designed to accommodate tracheotomy and ventilator tubing. The "slot" between the two chest pieces is a variable width.
    
7. Is the patient lift shipped assembled?
    
   All of our EasyPivot models are shipped assembled – but "knocked down." Assembly takes five minutes and requires only a wrench. Written instructions are provided. Our toll-free (800) 467-7967 customer support number is also available.
    
8. Our patient has wide thighs.  Is there a bigger knee pad available?
    
   There is a wide knee pad available for the Model EP-325. It does bolt to the same pattern as the standard one – so installation is quick. It is offset – so the extra knee pad width is in the direction opposite of the column.

Standing Frames Main Menu  -  Rand Scott Main Menu  -  Transfer Lift Main Menu