 |
|
|
EVA Elite Support
Walker |
|
|
The EVA Elite -
Sometimes referred to as a "Cardiac Walker", the Eva supports the
patient's weight when exercising. Good for Post-op patients when early
walking exercise is indicated. Easily adjustable to suit different
patient heights; and the armrest width can be adjusted to accommodate a
larger individual. Welded steel frame with baked epoxy enamel finish.
The padded arm panels have a sculptured forearm cutout to keep the arms
from sliding off the pads and is easily sanitized. The height adjustment
is controlled by a single knob at the front center of the frame. The
ergonomic designed handgrips are now a standard feature and are
included. Non-marring casters with step on wheel locks on the rear
casters (models with Hand Brakes do not have rear caster locks). This
model is designed for heavy duty institutional use. Made in Norway.
Height adjusts from 36"-50". Outside base width is 26", inside base
width at point of entry is 23.2" and flared to 19" at the front of base.
Base length is 27". Length of adjustable padded arm is 17.5" and 6.5"
wide. Optional accessories are: 83614 - Walker Basket, 83615-IV Pole and
83617-Port. E&D Oxygen Tank Holder (scroll down to view accessories). #
83602-Eva Elite, and # 83607-Eva Elite w/Hand Brakes.
|
|
Eva Walker
|
 |
DISCONTINUED...THIS
PRODUCT HAS BEEN REPLACED BY THE EVA ELITE!!!!! Model # 83610. The
different style of Handgrips, as well as the accessories shown below are
still available for this unit.
|
|
HANDGRIPS (not shown)
|
| |
# 83612 -
ARTICULATED HANDGRIPS are set in a ball socket to provide 45 degrees of
angle to accommodate most users with limited hand involvement. Each grip
can be horizontally adjusted 4". The post frames are identical which
offset the position by 1/2". #83613 - STANDARD HANDGRIPS (Shown on above
Eva)can be horizontally adjusted up to 4". BOTH HANDGRIPS are still
available.
|
|
Portable E&D Tank
Holder |
 |
Chromed steel
construction with plastisol coating at the contact points. Will
accommodate a D or E model oxygen tank. Fits all EVA Walkers. The
Portable O2 Holder is designed prevent it from tipping the EVA. It rests
on the front lower frame and is then bolted to the cross bar frame,
tilting it toward the back and center of the EVA. Model # 83617. (shown
on an EVA Electric Walker)
|
|
IV Pole & Bracket f/EVA
|
 |
The IV Pole has a
metal bracket that attaches under and on the side of the support frame.
Allows mobility to those that require IV's. Model # 83615
|
|
Basket for EVA Walker
|
 |
A metal bracket
attaches to the front underside of the EVA Walker. The wire basket is
bolted to the bracket. The basket measures 10"w x 6 1/2" d x 6" h. Model
# 83614. Pictured on an Eva Electric.
|
|
Eva Walker |
|
|
View
Walker Main Menu Here!
Planet Mobility Main Menu.!
- Online
Mall
 |
