|
PL-72 Lift
- Lift Up To 6' Ft
Now
Only $3295.
|
>>> LOWEST PRICE
ON THE PLANET <<< |
| |
| We Guarantee The
Worlds Lowest Price! |
| If You Find A
Lower Price We Will Beat It + Give You 10% Of The Difference Or It Is
Free... |
NOTE: Tower is reversible from side to side
PL- 72 platform lifting height is 72" maximum All lift
options available with this unit.
PL-72 Lift Specifications
Description of Product
The product described herein, is a precision
vertical platform lifting device consisting of a machine tower with
lifting platform, selected and dimensioned to provide adequate lifting
height to suit the residential building requirement. The lift can be used
indoors and outdoors to vertically transport a wheelchair user or
otherwise mobility-impaired person, up and over a low-rise barrier created
by stairs, thus creating access to or within the building.
The lift when configured with appropriate options can
meet the ANSI Al 7.1 Part XX, Section 2100 codes, as it relates to
residential applications.
Quality Assurance
Performance Requirements:
The unit shall be assembled and pre-wired (less
optional equipment and necessary gates) and manufactured with adequate
lifting and load capacity for application described elsewhere in this
specification.
The unit shall be easy to operate by the user or attendant and shall be
capable of functioning in all weather conditions.
The unit shall have the capacity to lift up to 500 lbs. to the desired
lifting height up to a maximum lift height of six ( 6 ) feet.
Composition of Materials:
Machine tower: 14 gauge cold rolled steel.
Base frame: 1 1/2" square x 3/16" Structural steel tubing.
Lift weldment: 1 1/2" x 3" x .188" wall structure steel
tubing.
Tower cap: 10 gauge cold rolled steel plate
Side Guard Rails: 1" round x .120" gauge steel tubing (frame).
Platform: 14 gauge cold rolled steel plate with slip resistance surface.
Access ramp: 11 gauge steel plate with slip resistance surface.
Electrical box: 16 gauge galvanized steel
Switch box: Hi-impact A.B.S. Thermoplastic instrument case.
Lirnitations: Vertical platform lift shall operate both indoors and out,
and must be anchored on a level, 4" thick, 3500 psi reinforced
concrete surface or pad.
Electrical
System
Wiring:
The unit shall be pre-wired by manufacturer with exterior grade
thermoplastic coated wiring. Extension Cord, 14 gauge UL-CSA approved is
recommended if power source is not within three (3) feet of Machine tower.
Machine may also be wired using water proof conduct.
Powder
Coat Finish
Prep, Primer,
& Powder Coat Process
1. 3 Stage wash, soapy water, clear
water, and Iron Phosphate which is applied to parts.
2. Parts are inspected and scuffed
3. Epoxy Primer is applied
4. Parts are baked at 250 degrees for 15
minutes
5. Parts are inspected and scuffed if
needed
6. Huebert O'Brian Powder-TCIC Polyester
7. Mixed with Paint, Color Almond
PFT-500-SS
8. Powder Coat is applied and baked at
400 degrees for 30 min.
9. Parts are inspected and scuffed
if needed
Safety Devices
The unit shall have the
following safety features for protection of users and the general public:
· Upper and lower limit switches
· Instant Reverse Motor
· Powered with 110 volt AC current, by 1/2 HP motor, 6.4 Amp
· Grounded electrical system
· Heavy duty worm drive gear box with heavy duty #50 lifting chain
· Automatic access ramp
· 36" guard rails on non-enter and exit sides of platform
· Non-Skid platform and access ramp surface
· Key-lock control
· Switching & Control system 24 VAC low voltage current
Installation
The contractor shall
do all work and supply all materials necessary for the complete
installation, It is the intent of this specification to outline broadly
the equipment required but not to cover the details of design and
construction .
Maintenance
Maintenance of the vertical platform lift unit
shall consist of regular cleaning of the unit, protection of the painted
surface of the unit.
Warranty
Unit shall have one ( 1 ) year limited warranty
on the basic unit and electrical system with a two (2) year warranty of
drive train components.
Note:
This specification has been written to
assist you in preparing an accurate and detailed
description for specifying a vertical platform lift. All or part of this
specification may be reproduced. Additional technical information is
available from our Product Engineering Department.
 
View
Adjacent Access or 90 Degree Platform
PL-50
- PL-72 -
Adjacent 90 Degree -
ADA Unit -
Landing Gate -
Pricing -
Installation
PL-36 Wheelchair Lift.....!
Need To Lift Up To 12' ft High Click Here!
Wheelchair Lifts Main Menu
Planet Mobility Main Menu.!
- Online
Mall
 |
