| |
|
|
|
 |
|
The Commercial Trus-T-Lift
Fully Code Compliant
YES WE CAN!
What exactly
is a code compliant vertical platform lift?
There are 9 different national codes that regulate the design and
installation of vertical platform lifts in the U.S. Each state
and in some cases municipalities within a state will follow one of
the nine different codes and then in many cases make changes and
additions to the code. Also, individual elevator inspectors may
have their own requirements for a particular application. Sounds
confusing? It is if you attempt to supply your customer with a
vertical lift prior to finding out what the local Elevator
authority requirements are first. It�s a bit like getting in your
car and driving without knowing where it is that you want to go.
|
|
|
| |
|
|
|
| How can I
meet the code and regulatory requirements?
The short answer is that we can
configure a RAM Lift to meet any code requirement for vertical
platform lifts and meet most individual inspector requirements.
Our team at RAM Manufacturing Ltd. has been installing vertical
platform lifts in commercial and Commercial buildings for over
20 years and we will work with you to successfully complete your
lift project.
For a successful project follow these steps:
- Gather information on the project
such as Building address, lifting height and lift
configuration (use Design-A �Lift for the configuration or
scan a copy of the building plans).
- Email or fax the building
information to RAM and we will provide you with an
installation drawing showing the technical specifications.
- Submit the drawings to the local
elevator regulatory authority and discuss the application
with them to determine if there are any additional
requirements.
- Provide the inspector requirements
to RAM, we can then supply you with an appropriate lift
quote and final installation drawings.
|
|
|
 |
| |
|
|
|
| |
Trus-T-Lift
wheelchair lifts allow people with mobility issues to remain
active, improving the quality of life. It's there personal
freedom, and that is important to us� That is our job.
Safety, comfort and convenience
were Trus-T-Lifts #1 design considerations.
Features
-
Innovative Soft Touch Control Pads
for ease of operation.
-
Direct drive Worm-Gear / Screw-Nut
Drive for maintenance free operation, incorporating zero
load start for cold weather climates (drive system allows
motor to get up to full speed before lifting car).
-
Expanded Metal Platform allows full
under platform visibility.
-
Keyed Emergency Stop to control use
of lift.
|
|
 |
| |
|
|
|
 |
| |
Smooth and quiet performance makes this
light weight, dependable and versatile unit perfect for any
Commercial or commercial application.
We are proud to to say we manufacture
the highest quality Wheelchair Lift / Platform Lift in the world.
In addition to the quality is the price. You will not find a
better price on a fully code compliant Wheelchair Lift anywhere in
the world. |
|
|
| |
|
|
| |
"Installation":
Installing the commercial Trus-T-Lift is simple, smooth and
easy. In most parts of the country it is required that the lift
be installed by a licensed elevator installer, however is some
parts of our country a licenses in not required. We recommended
you contact your local building /elevator department to be sure
what is required of the installer. Trus-T-Lift does not require
credentials however, Any installer accepting the role of
installing the lift also accepts the responsibility of any
problems that should arise due to incorrect installation. Trus-T-Lift
is happy to give advise and guidance during installation. Simply
call Tru-T-Lift directly and to speak with tech support.
|
|
|
 |
| |
|
|
|
 |
|
"Straight Trough": Straight through application means that the
lift would be entered by one side and after raising and reaching
the destination landing would be exited on the opposite side. |
|
|
| |
|
|
| |
|
|
|
 |
|
"Adjacent Access":
Adjacent access application means that the lift would be entered
by one side and after raising and reaching the destination
landing would be exited to the right or left.
"Same Side": Same
side
application means that the lift would be
entered by one side and after raising and reaching the
destination landing would be exited at the same location it was
entered.
The Trus-T-Lift can
be ordered to travel up to
12' Feet and can be
used with many applications.
|
|
|
| |
|
|
