In celebration of the 2004
Games, Quickie is proud to introduce the Quickie Ti Limited Edition
wheelchair. The chair features the same adjustable, ultra-lightweight
design of the Quickie Ti, but also includes:
* Metallic orange anodized parts
* Greece 2004 backpack
* Folding backrest with adjustable upholstery featuring an embroidered
Quickie Ti Limited Edition patch
* Certificate of Authenticity
* Limited Edition Greece 2004 embroidered leg straps
* Impact Guards
The
Titanium Advantage
Titanium alloy is approximately 3 times stronger than aluminum. This
advantage in strength makes it possible to build a lighter, simpler
frame. Titanium tubing also provides a more controlled rebound and
superior torque strength. With an average weight of 16.9 lbs, the
Quickie® Ti Titanium is Sunrise Medical's premium rigid-chair
choice.
Patent-Pending Caster Pivot-Adjuster
To reduce excess weight and flutter, our engineers have eliminated
the caster housing so that the caster fork now threads directly into
the frame. A special pivot caster-adjuster allows the forks to pivot
16° in 2° increments. This feature enables the user to adjust the
seat "slope" between 2.5 - 9cm (1" - 3.5") while maintaining a
perpendicular caster-wheel/ground alignment.
Custom
Tailored Frame Options
To ensure the best possible fit, our engineers have developed over
4,000 different frame configurations. Each frame can be customized
in six different ways: frame angle (70°, 80°, 85°), frame inset
(2.5cm/1", 5cm/2", 7.5cm/3"), front seat-height (40.5 - 51cm/16 -
20" in 1.3cm/½" increments), rear seat-height (35.5 - 48cm/14 - 19"
in 1.3cm/½" increments), seat width (33 - 46cm/13 - 18"), and seat
depth (35.5 - 48cm/14 - 19").
Easy-To-Load Design
A fold-down back, "L" shaped frame and extremely low frame-weight
make vehicle transfers about as easy as loading a briefcase.
The new
Quickie® Ti Titanium chair is distinctly different from the Quickie
(GPV) Ti Titanium. Its new mono-tube construction and reduced weight
create a fresh concept in titanium chair design. The Quickie (GPV)
Ti Titanium chair is now referred to as the "Quickie® GPV Titanium".
The rear axle
features 4" of center-of-gravity adjustment in 1/2" increments. When
a chair is not properly centered, it feels heavy, unresponsive, and
sometimes "tippy". By using a 4" adjustment range that accommodates
many different body types, this problem can be avoided.
The Quickie Ti
Titanium features new fold-down push handles. Push handles sometimes
act like fish hooks when pulling a chair out of storage. In
contrast, fold-down push handles allow the chair to slide out
without hooking everything else.
A special flat
area on the axle-sleeve nut corrects toe-in and toe-out in three
easy steps: Loosen the camber tube. Place a square against the flat
area on the axle-sleeve nut and the ground. Re-tighten the camber
tube. The wheels are now aligned.
The axle plate
features 3" vertical adjustment in 1/2" increments. This provides
plenty of space to adjust wheel sizes, seat height and seat angle.
The rear
camber tube is secured to the axle plate with a special compression
axle sleeve. The axle sleeve is held together with Torx® head
screws. This advanced hardware is superior in design and holding
power. A special tool kit containing Torx wrenches ships with the
chair.
Built to
meet the requirements of HCPCS code:
K0005
Product
Weight:
Approx. 15 -
20 lbs. w/o footrests
Product
Width:
13 in. - 18
in. seat width
Product
Length/Depth:
14 in. - 19
in. seat depth
Product
Height:
16 in. - 20
in. seat to floor
Shipping
Dimensions (box 1):
31"w X 24"h X
24"d
Ship
Method(s):
Ground, Next
Day, 2 Day, 3 Day
Product
Weight Capacity:
250 lbs.
Overall
Width
19 in. - 31
in.
Caster
Options
3 in., 4 in.,
5 in.
Rear
Wheel Options
24 in., 24 in.
heat treated, 26 in., 26 in. heat treated
Axle
Options
Standard
stainless-steel, optional Titanium, and quad-release axle nuts
Launch
Date:
October 2,
2003
Limited Edition - July 29, 2004
>>> LOWEST PRICE
ON THE PLANET <<<
We Guarantee The
Worlds Lowest Price!
If You Find A Lower Price
We Will Beat It + Give You 10% Of The Difference Or It Is Free...
