Does your tennis chair feel
heavy? Try the new Quickie Ti Match Point®. Modeled after our highly
successful Quickie (aluminum) Ti Match Point, the Quickie Ti Match Point
features a titanium seat-frame that cuts over 2.5 lbs off the overall
weight. This change and a series of other new options makes the Quickie
Ti Match Point one of the most nimble chairs on today's tennis court.
Center-Of-Mass Adjustment System
Our patented center-of-mass adjustment system provides a maximum
horizontal (center-of-gravity) adjustment-range of 3.5" and up to 5"
of vertical seat-squeeze (or seat dump) adjustment. This combination
of adjustment-systems allows users to align their weight over the
push-wheels and optimize their seat angles without making changes in
fork size, caster size, caster-stem size, or fork-hole location.
Titanium Seat-Frame
Titanium is more than twice as strong as aluminum. This is one
reason why it is possible to use much thinner tubing and still
maintain overall strength. Unpainted titanium is also more scratch
and corrosion resistant.
5th
Wheel Anti-Tip
The Quickie Ti Match Point features a standard single integrated
fifth-wheel anti-tip. This anti-tip caster allows players to move
their weight directly over the rear wheels, providing a tremendous
advantage in maneuverability and power.
Anti-Tip Brace
The 5th wheel anti-tip brace is a new option featured on the Quickie
Ti Match Point. This adjustable brace, located between the backrest
towel bar and the integrated anti-tip, eliminates the rearward flex
in the seat frame caused when the player leans backwards. With this
option, the player no longer has to adjust to the flex in the seat
when serving or leaning back for a slam.
The Quickie Ti
Match Point now features special extra-hard caster wheels (92
durometer hardness). The new casters ensure that chair speed and
maneuverability are not simply absorbed in the wheels.
A 15" deep
base-frame is now available. Not only does this size match the new
10" , 11" and 12" seat depths, but it also provides an option for
13", 14" and 15" seat-depth users who desire a shorter wheelbase for
increased maneuverability.
The Quickie Ti
Match Point features an extra wide front "footprint" (distance
between the caster housings). This additional width provides the
necessary stability when a tennis player leans forward and to the
side to reach a difficult shot.
Bolt-on toe
clips are a new option featured on the Quickie Ti Match Point. These
clips hold the players feet on the footplates when they attempt to
stretch forward for a difficult shot.
The new
ratchet-style positioning belt was inspired by a prototype developed
by one of our own athletes. This belt features two sets of locking
ratchet-clamps similar to those used in snowboard bindings. These
ratchet-clamps allow the tightest possible connection to the chair.
The stronger the connection, the easier upper-body movements
transfer into chair movement.
Extreme camber
options of 16° and 20° offer superior stability and effortless
turning.
Product
Weight:
20 lbs. (for a
16 x 16 stadard frame-size with no extras)
Product
Width:
12 in. - 20
in. seat widths
Product
Length/Depth:
10 in. - 20
in. seat depth
Product
Height:
16 in. - 21
in. front seat-height (dependent on frame height)
Shipping
Dimensions (box 1):
31"w / 24"h /
37"d
Shipping
Dimensions (box 2):
55" w / 29"h /
41" d (long frame-length 21")
Ship
Method(s):
Ground, next
day, 2 day, 3 day, or freight carrier (depending on seat size)
Product
Weight Capacity:
250 lbs.
Shipping
Weight:
50 lbs.
Caster
Options
3" Micro's
Rear
Wheel Options
Spoke wheels
and Spinergy sports wheels, 24 in. (540), 24 in. (559), 26 in. (590)
Axle
Options
Stainless
steel, optional titanium or quad-release axles
Camber
Options
16 or 20
degrees
>>> LOWEST
PRICE ON THE PLANET <<<
We Guarantee
The Worlds Lowest Price!
If You Find A Lower Price
We Will Beat It + Give You 10% Of The Difference Or It IS Yours Free...
